AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 712

Memory Card
Card Removed after Confirmation
The memory card was removed from the PCMCIA interface slot while the restore
was in progress. The restore is aborted and the system performs a System
Erase (frigid start). You must reinsert the memory card and repeat the restore
procedure.
Wrong System Programming Port
nn
The system programming port is not set to the same system programming port
as that set in the backup file. The restore is aborted. Use the Inspect feature to
view the port of the file on the card. Change the system programming port to
match the port shown on the card (see "System Programming Position
Assignment") and repeat the restore procedure.
Release Mismatch
n
X.Y
This screen only appears if you are upgrading from Release 3.0 or higher and
the releases are not compatible.
4–340
Programming Procedures
n = filename selected
xxxx = system programming port
NNNN
extension
n = filename selected
X.Y = release number