AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 96

Using SPM
On the PC screen, the letters
green LEDs, respectively, that are on the console. For example, if a line, trunk, or
pool is assigned to a line button, on the console a green LED lights next to the
button. On the PC screen, the letter
Similarly, if a line, trunk, or pool is not assigned to a line button, neither
display next to the button on the PC screen. If a trunk is assigned to a pool, an
(for red) displays on the PC screen.
The labels in the column on the right side of the screen show key combinations
that correspond to buttons on the MLX-20L telephone. Table 2–2 describes the
function of PC keys in SPM.
Table 2–2. Function of PC Keys in SPM
PC Key
P
+
F
+
C
+
H
+
U
+
n
+
+
2–18
Programming with SPM
4 /
and represent the ON state of the red and
/
(for green) displays next to the button.
Console SPM Function
Home Quit. Exit from SPM and return to the DOS
prompt when you finish with system
programming. If you are using a modem, the
call is disconnected.
Menu Return to the SPM Main Menu.
Display more menu items (when there is another
More
screen and the
key).
Inspct Show the current information that has been
programmed for a feature or button.
Drop Enter a stop in a speed dialing sequence. This
combination also deletes an entry in a field on
any screen except one in which you are
entering a speed dialing sequence.
Conf Flash. Enter a switchhook flash in a speed
dialing sequence.
n/a TopSP. Return to the top of the System
Programming menu.
Hold Pause. Enter a pause in a speed dialing
sequence.
n/a Convert. Convert a backup file from its original
Release format to a different Release format.
n/a Toggle modem speed between 1200 to
2400 bps.
n/a Help. Display a help screen about SPM
operations. To exit from Help, press
>
symbol appears next to the
Continued on next page
/ 4
nor
4
.