AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 325

System Features
Console Display/Instructions
2 Select Disallow To Lists.
_
3 Enter the list number ( n = 0 to 7).
4 Save your entry.
Enter Enter
Select .
5 Specify the extension to which you want to assign the disallowed list.
6 Assign or remove the disallowed list from the extension.
Enter Enter
Select or
Delete Delete
.
7 Continue to assign extensions to the next disallowed list or go to Step 8.
Next Next
Select
8 Return to the System Programming menu.
Exit Exit
Select two times.
Dial or type [ n ].
N
x = list number entered in Step 3
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 7.
On = disallowed list is assigned.
Off = disallowed list is not assigned.
You may continue to assign or remove the
disallowed list from additional extensions
by repeating Steps 5 and 6.
Return to Step 5. The next disallowed list
will be displayed on Line 1.
Additional Information
Common Administrative Procedures
PC
3–189