AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 776

LED Displays
Table C–0. Line or Trunk Feature Status
System
Programming
Menu
Option Option
Lines Trunks Tie Lines
Inmode
Outmode
Dialtone
Lines Trunks TT/LS Disc
Outmode
Lines Trunks Pools
Lines Trunks Toll Type
Lines Trunks Hold
Disconct
Lines Trunks LS-ID Delay
Extensions Lines Trunks
*
LED Status is indicated on LEDs next to the 20 buttons below the display area of the system programming console
or simulated on the computer screen when using SPM.
†
This is the factory setting.
C–2
System Programming
Green LED
ON OFF
Incoming tie Incoming tie
line is touch- line is rotary
tone dial†
Outgoing tie Outgoing tie
line is touch- line is rotary
tone dial†
Remote dial Local dial
tone† tone
Line/Trunk is Line/trunk is
touch-tone† rotary dial
Must dial 1 + 1 + dialing is
area code† not needed
Long-450 Short- 50 ms
ms†
LS-ID Delay LS-ID Delay
is on is off†
Line/trunk or Line/trunk or
pool is pool is not
assigned to assigned to
button button
LED Status*
FLASHING ON
Trunk is in Trunk is not in
pool pool
Trunk is
assigned to a
pool
Red LED
OFF FLASHING