AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 581

Auxiliary Equipment
Console Display/Instructions
3 Select Transfer Return.
_
4 Erase the current interval setting ( x ).
N
5 Enter the number of rings before calls are transferred to the backup position
( n = 0 to 9).
6 Save your entry.
Enter Enter
Select .
7 Select Touch-Tone Duration.
_
8 Erase the current touch-tone duration setting ( xxx ).
NNN
9 Enter the touch-tone duration in milliseconds ( nnn = 50 to 200).
Additional Information
If you do not want to change the current
setting for number of rings before transfer,
go to Step 7.
Press Drop.
Use 0 to specify that calls are not transferred to
backup position.
Dial or type [ n ].
If you do not want to change the current
setting for touch-tone duration, go to
Step 11.
Press Drop.
Dial or type [ nnn ].
Programming Procedures
PC
2
2
4–209