AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 491

DID Trunks
2 Select DID.
_
3 Select Disconnect.
_
4 Enter the DID trunk.
5 Save your entry.
Enter
Enter
Select .
6 Erase the current disconnect time ( nnn ).
NNN
nnn
7 Enter the disconnect time in milliseconds
( nnn = 10 to 2400 ms, in increments of 10).
8 Continue to specify the disconnect time for another DID trunk or go to Step 9.
Next Next
Select .
Dial or type:
Trunk number [ nnn ]
*
Slot and port number

Logical ID number [ nnn ].
xxx = trunk entered in Step 4
Press Drop.
Dial or type [ nnn ].
Return to Step 6. The next DID trunk will be
displayed on Line 1.
Programming Procedures
[ sspp ]
4–119
F