AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 241

Optional Telephone Features
Console Display/Instructions
5 Assign or remove remote call forwarding from the extension entered in Step 4.
Enter Enter
Select or
Delete Delete
.
6 Return to the System Programming menu.
Exit Exit
Select two times.
Delayed Call Forwarding
Delayed Call Forwarding allows a user to answer or screen a call arriving at an
extension before the call is forwarded through Call Forwarding, Remote Call
Forwarding, or Follow Me. The forwarding delay is the number of rings before the
call is forwarded. This delay can range from 0 to 9 rings. If the forwarding delay
is set to 0, the call is forwarded immediately. Delayed Call Forwarding is only
available in Release 4.0 and later.
NOTE:
When Do Not Disturb is activated at an extension, it overrides Delayed Call
Forwarding and the call is forwarded immediately.
Use this procedure to assign or remove Delayed Call Forwarding from an
extension. If you are assigning Delayed Call Forwarding to a group of sequential
extensions, begin programming the lowest extension number to take advantage
Next
Next
of the screen key (see "Standard Procedures").
Summary: Delayed Call Forwarding
Programmable by
Mode
Idle Condition
Planning Form
Additional Information
You may assign or remove remote call
forwarding from additional extensions by
repeating Steps 4 and 5.
System manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Station
Data Form 1b, 7500B Data Station
Common Administrative Procedures
PC
3–105