AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 280

Optional Group Calling Features
Integrated VMI. Used when a voice messaging system that requires
special signaling for integrated operation (for example, AUDIX Voice
Power, IS II/III, or MERLIN MAIL
to one or more extension jacks assigned to a calling group. The system
automatically logs in the group members after a power failure.
Generic VM. Used when a voice messaging system that does not need
special signaling (for example, AT&T Attendant) is connected to one or
more extension jacks assigned to a calling group. The system
automatically logs in the group members after a power failure.
NOTE:
In Release 3.1 and later, any port programmed as a VMI port is programmed
with:
outward restriction on
a default FRL of 0 (the most restrictive)
a default Disallowed List (List 7) that includes the numbers frequently
associated with fraud
If the system manager changes a VMI port to an non-VMI port, the restrictions
are not turned off. To remove restrictions, the system manager must change
them thorough system programming.
Summary: Group Type
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3–144
Common Administrative Procedures
â
Voice Messaging System) is connected
System manager
All
Not required
Form 7d, Group Calling
Automatic Log Out
Automatic log in, Automatic log out, Integrated VMI,
Generic VMI
No
No
More
Dial calling group ext. no.
Specify login type
More
Specify login type
Type calling group ext. no
Type