AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 354

Print Reports
NOTES:
1. If you select the
minutes to print. You may want to schedule use of the printer during
off-peak hours.
2. If you select a report for which there is no information, the report header
still prints.
3. Print reports if you cannot back up your system programming information.
4. Do not print reports if your system must handle more than 100 calls per
hour.
5. If you are printing from the console, your printer must be connected to the
SMDR port. If you are programming on a PC with SPM, you have the
following choices:
See Chapter 2, "Programming With SPM," for details.
Summary: Printing System Reports
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure To print trunk information:
3–218
Common Administrative Procedures
option, keep in mind that the reports take several
Print reports on the SMDR printer (if available).
Print reports on the PC printer.
Save reports (on hard disk or floppy).
View reports (browse).
System manager
All
Not required
Not applicable
Not applicable
Any saved report
No
No
More
To print extension information:
More
To print all other reports:
More
Select trunk type
More Dial extension number
Select report