Defining Device Events Using the CLI Commands
The following table contains the CLI commands for defining device events.
Table 8-9. Device Event Definition CLI Commands
CLI Command
show rmon log [ event ] Displays the RMON logging table.
The following is an example of the CLI commands:
console(config)# rmon event 1 log
Console> show rmon log
Maximum table size: 500
Event Description
----- --------------- --------------
1
Errors
2
High Broadcast
Defining RMON Device Alarms
Use the RMON Alarms page to set network alarms. Network alarms occur when a network problem,
or event, is detected. Rising and falling thresholds generate events. For more information about events,
see "Viewing the RMON Events Log."
To open the RMON Alarms page, click Statistics/RMON→ RMON→ Alarms in the tree view.
Description
Time
Jan 18 2002 23:58:17
Jan 18 2002 23:59:48
431
Viewing Statistics