Defining Snmp Notification Recipients - Dell PowerConnect 3524P User Manual

Removing a Filter
1 Open the Notification Filter page.
2 Click Show All.
The Filter Table opens.
3 Select a Filter Table entry.
4 Check the Remove checkbox.
The filter entry is deleted, and the device is updated.
Configuring Notification Filters Using CLI Commands
The following table summarizes equivalent CLI commands for defining fields displayed in the
Notification Filter page.
Table 6-51. SNMP Notification Filter CLI Commands
CLI Command
snmp-server filter filter-name
oid-tree {included | excluded}
show snmp filters
The following is an example of CLI commands:
Console (config)# snmp-server filter user1 iso included
Console(config)# end
Console # show snmp filters
Name
-----------
user1

Defining SNMP Notification Recipients

The Notification Recipients page contains information for defining filters that determine whether traps
are sent to specific users, and the trap type sent. SNMP notification filters provide the following services:
• Identifying Management Trap Targets
• Trap Filtering
• Selecting Trap Generation Parameters
• Providing Access Control Checks
240
Configuring System Information
Description
Creates or updates an SNMP notification filter.
Displays the configuration of SNMP
[filtername]
notification filters
OID Tree
-------------
iso
Type
--------
Included