Dell PowerConnect 3524P User Manual page 320

• VLAN ID — The VLAN ID for which the table is queried.
• Address Table Sort Key — Specifies the means by which the Dynamic Address Table is sorted.
The address table can be sorted by Address, VLAN or Interface.
Redefining the Aging Time
1 Open the Dynamic Address Table.
2 Define the Address Aging field.
3 Click Apply Changes.
The aging time is modified, and the device is updated.
Querying the Dynamic Address Table
1 Open the Dynamic Address Table.
2 Define the parameter by which to query the Dynamic Address Table.
Entries can be queried by Port, MAC Address, or VLAN ID.
3 Click Query.
The Dynamic Address Table is queried, and the results are displayed.
Sorting the Dynamic Address Table
1 Open the Dynamic Address Table.
2 From the Address Table Sort Key drop-down menu, select whether to sort addresses by address, VLAN
ID, or interface.
3 Click Query.
The Dynamic Address Table is sorted.
Querying and Sorting Dynamic Addresses Using CLI Commands
The following table summarizes the equivalent CLI commands for aging, querying, and sorting dynamic
addresses as displayed in the Dynamic Address Table.
Table 7-17. Query and Sort CLI Commands
CLI Command
bridge aging-time seconds
show bridge address-table
ethernet interface
[
]
channel-number
320
Configuring Switch Information
vlan vlan
[ ]
port-channel port-
|
Description
Sets the address table aging time.
Displays classes of dynamically created entries in the bridge-
forwarding database.