Dell PowerConnect 3524P User Manual page 449

The CoS to Queue page contains the following fields:
• Class of Service — Specifies the CoS priority tag values, where zero is the lowest and 7 is the highest.
• Queue — The queue to which the CoS priority is mapped. Four traffic priority queues are supported.
• Restore Defaults — Restores the device factory defaults for mapping CoS values to an egress queue.
Mapping a CoS Value to a Queue
1 Open the CoS to Queue page.
2 Select a CoS entry.
3 Define the queue number in the Queue field.
4 Click Apply Changes.
The CoS value is mapped to an egress queue, and the device is updated.
Assigning CoS Values to Queues Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the CoS to
Queue page.
Table 9-6. CoS to Queue Settings CLI Commands
CLI Command
wrr-queue cos-map queue-id
cos0.cos7
The following is an example of the CLI commands:
console(config)# wrr-queue cos-map 4 7
Description
Maps assigned CoS values to the egress
queues.
Configuring Quality of Service
449