Dell PowerConnect 3524P User Manual page 110

3 Define the fields.
4 Click Apply Changes.
The SNTP Server is added, and the device is updated.
Displaying the SNTP Server Table
1 Open the SNTP Servers page.
2 Click Show All.
The SNTP Servers Table opens.
Figure 6-16. SNTP Servers Table
Modifying an SNTP Server
1 Open the SNTP Servers page.
2 Click Show All.
The SNTP Servers Table opens.
3 Select an SNTP Server entry.
4 Modify the relevant fields.
5 Click Apply Changes.
The SNTP Server information is updated.
Deleting the SNTP Server
1 Open the SNTP Servers page.
2 Click Show All.
The SNTP Servers Table opens.
3 Select an SNTP Server entry.
4 Select the Remove check box.
5 Click Apply Changes.
The entry is removed, and the device is updated.
110
Configuring System Information