Dell PowerConnect 3524P User Manual page 329

Table 7-19. STP Global Parameter CLI Commands (continued)
CLI Command
show spanning-tree [ethernet interface | port-
channel port-channel-number] [instance instance-id]
show spanning-tree [detail] [active |
blockedports] [instance instance-id]
show spanning-tree mst-configuration
The following is an example of the CLI commands:
console(config)# spanning-tree
console(config)# spanning-tree mode rstp
console(config)# spanning-tree priority 12288
console(config)# spanning-tree hello-time 5
console(config)# spanning-tree max-age 12
console(config)# spanning-tree forward-time 25
console(config)# exit
console# show spanning-tree
Spanning tree enabled mode MSTP
Default port cost method: short
Gathering information ..........
###### MST 0 Vlans Mapped:
CST Root ID Priority 20480
Address
Path Cost
Root Port
This switch is the IST master
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority
Address
Max hops
Description
Displays spanning tree configuration.
Displays detailed spanning tree information on active or
blocked ports.
Displays spanning tree MST configuration identifier.
16-4094
00:30:ab:00:00:08
4
ch2
32768
00:00:00:16:00:64
20
Configuring Switch Information
329