Dell PowerConnect 3524P User Manual page 376

Defining Voice VLAN Global Parameters Using CLI Commands
The following table summarizes the equivalent CLI command for defining Voice VLAN global parameters .
Voice VLAN Global Parameters
Table 7-33.
CLI Command
voice vlan id vlan-id
no voice vlan id
voice vlan cos cos
no voice vlan cos
voice vlan aging-timeout minutes
no voice aging-timeout
voice vlan enable
show voice vlan [ ethernet interface |
port-channel port-channel-number ]
The following is an example of some of the CLI commands:
Switch# show voice
vlan
Aging timeout: 1440
minutes
OUI table
MAC Address - Prefix
00:E0:BB
00:03:6B
00:E0:75
00:D0:1E
00:01:E3
00:60:B9
376
Configuring Switch Information
CLI Commands
Description
To enable the voice VLAN and to configure the voice VLAN ID, use the
voice vlan id command in global configuration mode. To disable the
voice VLAN, enter the no form of this command.
To set the voice VLAN Class Of Service, use the voice vlan cos
command in global configuration mode. To return to default, use the
no form of this command.
To set the voice VLAN aging timeout, use the voice vlan aging-timeout
command in global configuration mode. To return to default, use the
no form of this command.
Use the voice vlan enable interface configuration command to enable
automatic voice VLAN configuration for a port. Use the no form of this
command to disable automatic voice VLAN configuration.
Use the show voice vlan EXEC command to display the voice VLAN
status.
Description
3COM
Cisco
Veritel
Pingtel
Siemens
NEC/Philips