Dell PowerConnect 3524P User Manual page 319

To open the Dynamic Address Table page, click Switch → Address Tables → Dynamic MAC Address in
the tree view.
Figure 7-32. Dynamic Address Table
The Dynamic Address Table page contain the following fields:
• Address Aging (10-3825) — Specifies the amount of time (in seconds) the MAC Address remains in
the Dynamic Address Table before it is timed out if no traffic from the source is detected. The default
value is 300 seconds.
• Clear Table — Clears the Dynamic Address table.
– Checked — Clears the Dynamic Address table.
– Unchecked — Maintains the Dynamic Address table.
Query By
In the Query By section, select the preferred option for sorting the Dynamic Addresses Table:
• Port — Specifies the interface for which the table is queried. There are two interface types from which
to select.
• MAC Address — Specifies the MAC address for which the table is queried.
Configuring Switch Information
319