Dell PowerConnect 3524P User Manual page 65

Boot Image Download
Loading a new boot image from the TFTP server and programming it into the flash updates the boot
image. The boot image is loaded when the device is powered on. A user has no control over the boot
image copies. To download a boot image through the TFTP server:
1 Ensure that an IP address is configured on one of the device ports and pings can be sent to
a TFTP server.
2 Ensure that the file to be downloaded is saved on the TFTP server (the rfb file).
3 Enter the show version command to verify which software version is currently running on the device.
The following is an example of the information that appears:
console# show version
SW version
Boot version 1.0.0.05 (date 27-Jan-xxxx time 15:12:20)
HW version
4 Enter the copy tftp://{tftp address}/{file name} boot command to copy the boot
image to the device. The following is an example of the information that appears:
console# copy tftp://176.215.31.3/332448-10018.rfb boot
Erasing file..done.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Copy: 2739187 bytes copied in 00:01:13 [hh:mm:ss]
5 Enter the reload command. The following message is displayed:
console# reload
This command will reset the whole system and disconnect your current
session. Do you want to continue (y/n) [n]?
6 Enter y. The device reboots.
1.0.0.30 (date 27-Jan-xxxx time 13:42:41)
Configuring PowerConnect 3524/P and 3548/P
65