Dell PowerConnect 3524P User Manual page 136

Deleting a DHCP IPv4 Interface
1 Open the DHCP IPv4 Interface page.
2 Click Show All.
The DHCP IPv4 Interface Table opens.
IPv4
Figure 6-32. DHCP
3 Select a DHCP client entry.
4 Select the Remove check box.
5 Click Apply Changes.
The selected entry is deleted, and the device is updated.
Defining DHCP IPv4 Interfaces Using CLI Commands
The following table summarizes the equivalent CLI commands for defining DHCP clients.
Table 6-21. DHCP IPv4 Interface CLI Commands
CLI Command
ip address dhcp
[ hostname host-name
The following is an example of the CLI command:
console(config)# interface ethernet 1/e11
console(config-if)# ip address dhcp
136
Configuring System Information
Interface Table
Description
To acquire an IP address on an Ethernet interface from the
] Dynamic Host Configuration Protocol (DHCP).