Dell PowerConnect 3524P User Manual page 176

Defining Access Profiles Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the Access
Profiles page.
Table 6-33. Access Profiles CLI Commands
CLI Command
management access-list name
permit [ethernet interface-number |
vlan vlan-id | port-channel number]
[service service]
permit ip-source {ipv4-address | ipv6-
address / prefix-length} [mask mask |
prefix-length] [ethernet interface-
number | vlan vlan-id | port-channel
number] [service service]
deny [ethernet interface-number | vlan
vlan-id | port-channel number] [service
service]
deny ip-source {ipv4-address | ipv6-
address / prefix-length} [mask mask |
prefix-length] [ethernet interface-
number | vlan vlan-id | port-channel
number] [service service]
management access-class {console-only
| name}
show management access-list [name]
show management access-class
176
Configuring System Information
Description
Defines an access-list for management, and enters
the access-list context for configuration.
Sets port permitting conditions for the management
access list.
Sets port permitting conditions for the management
access list, and the selected management method.
Sets port denying conditions for the management
access list, and the selected management method.
Sets port denying conditions for the management
access list, and the selected management method.
Defines which access-list is used as the active
management connections.
Displays the active management access-lists.
Displays information about management access-
class.