Dell PowerConnect 3524P User Manual page 34

The following table describes the system LED indications.
Table 2-5. System LED Indicators
LED
Power Supply (PWR)
Redundant Power Supply (RPS)
(models: 3524 and 3548 )
Redundant Power Supply (RPS)
(models: 3524P and 3548P )
Diagnostics (DIAG)
Temperature (TEMP)
Fan (FAN)
The Stacking LEDs indicate the unit position in the stack. The following figure illustrates the LEDs on
the front panel.
Figure 2-10. Stacking LEDs
34
Hardware Description
Color Description
Green Static The switch is turned on.
OFF The switch is turned off.
Green Static The RPS is currently operating.
Red Static The RPS failed.
OFF The redundant power supply is not plugged in.
Green Static The RPS is currently operating.
OFF The redundant power supply has failed or is not
plugged in.
Green Flashing The system diagnostic test is currently in progress.
Green Static The system diagnostic test passed successfully.
Red Static The system diagnostic test failed.
OFF The system is operating normally.
Red Static The device has crossed the permitted temperature
range.
OFF The device is operating within the permitted
temperature range.
Green Static All device fans are operating normally.
Red Static One or more of the device fans is not operating.