•
Dynamic VLAN Creation — Indicates if Dynamic VLAN creation is enabled on the interface.
The possible field values are:
–
Enabled — Enables Dynamic VLAN creation on the interface.
–
Disabled — Disables Dynamic VLAN creation on the interface.
•
GVRP Registration — Indicates if VLAN registration through GVRP is enabled on the interface.
The possible field values are:
–
Enabled — Enables GVRP registration on the interface.
–
Disabled — Disables GVRP registration on the interface.
Enabling GVRP on the Device
1 Open the GVRP Global Parameters page.
2 Select Enable in the GVRP Global Status field.
3 Click Apply Changes.
GVRP is enabled on the device.
Enabling VLAN Registration Through GVRP
1 Open the GVRP Global Parameters page.
2 Select Enable in the GVRP Global Status.
3 Select Enable in the GVRP State field for the desired interface.
4 Select Enable in the GVRP Registration field.
5 Click Apply Changes.
GVRP VLAN Registration is enabled on the port, and the device is updated.
Configuring Switch Information
371