Dell PowerConnect 3524P User Manual page 232

Adding Users to a Group
1 Open the SNMPv3 User Security Model (USM) page.
2 Click Add.
The Add SNMPv3 User Name page opens.
Figure 6-95. Add SNMPv3 User Name
3 Define the relevant fields.
4 Click Apply Changes.
The user is added to the group, and the device is updated.
Displaying the User Security Model Table
1 Open the SNMPv3 User Security Model (USM) page.
2 Click Show All.
The User Security Model Table opens.
Figure 6-96. User Security Model Table
232
Configuring System Information