Dell PowerConnect 3524P User Manual page 245

Configuring SNMP Notification Recipients Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the
Notification Recipients page.
Table 6-52. SNMP Community CLI Commands
CLI Command
snmp-server host {ipaddress | hostname}
community-string [traps | informs] [1 | 2]
[udp-port port] [filter filtername]
[timeout seconds] [retries retries]
snmp-server v3-host {ip-address |
hostname} username [traps | informs]
{noauth | auth | priv} [udp-port port]
[filter filtername] [timeout seconds]
[retries retries]
show snmp
The following is an example of the CLI commands:
console(config)# snmp-server host 172.16.1.1 private
console(config)# end
console# show snmp
Community-String
----------------
public
private
private
Description
Creates or updates a notification
recipient receiving notifications in
SNMP version 1 or 2.
Creates or updates a notification
recipient receiving notifications in
SNMP version 3.
Shows the current SNMP
configuration.
Community-Access View name
---------------- ---------
read only
read write
su
IP address
----------
user-view All
default 172.16.1.1
DefaultSuper 172.17.1.1
Configuring System Information
245