Dell PowerConnect 3524P User Manual page 130

Figure 6-26. IPv4 Default Gateway
The IPv4 Default Gateway page contains the following fields:
• User Defined — The device's Gateway IP address.
• Active — Indicates if the Gateway is active.
• Remove User Defined — Removes the default gateway. The possible field values are:
– Checked — Removes the selected default gateway.
– Unchecked — Maintains the default gateway.
Selecting a Device's IPv4 Gateway
1 Open the IPv4 Default Gateway page.
2 Type an IP address in the User Defined field.
3 Select the Active check box.
4 Click Apply Changes.
The device's Default Gateway is selected and the device is updated.
Removing a Device's IPv4 Default Gateway Device
1 Open the IPv4 Default Gateway page.
2 Select the Remove User Defined check box to remove default gateways.
3 Click Apply Changes.
The default gateway entry is removed, and the device is updated.
130
Configuring System Information