Dell PowerConnect 3524P User Manual page 95

User's guide
Hide thumbs Also See for PowerConnect 3524P:
Table of Contents

Advertisement

Test — Indicates the powered device is being tested. For example, a powered device is tested to
confirm it is receiving power from the power supply.
Other Fault —
Unknown —
Power Priority Level
priority is used if the power supply is low. The field default is low. For example, if the power supply
is running at 99% usage, and port 1 is prioritized as high, but port 3 is prioritized as low, port 1 is
prioritized to receive power, and port 3 may be denied power.
Critical — Assigns the highest power priority level.
High — Assigns the second highest power priority level.
Low — Assigns the lowest power priority level.
Power Classification — Indicates the powered device is classed according to the following
classification:
Class 0: 0.44 – 12.95 — Indicates that the port is assigned a power consumption level of .44 to
12.95 Watts.
Class 1: 0.44 – 3.8 — Indicates that the port is assigned a power consumption level of .44 to
3.8 Watts.
Class 2: 3.84 – 6.49 — Indicates that the port is assigned a power consumption level of 3.84 to
6.49 Watts.
Class 3: 6.49 – 12.95 — Indicates that the port is assigned a power consumption level of 6.49 to
12.95 Watts.
Powered Device (0-24 characters) — Provides a user-defined powered device description. The field
can contain up to 24 characters.
Overload Counter — Indicates the total power overload occurrences.
Short Counter — Indicates the total power shortage occurrences.
Denied Counter — Indicates times the powered device was denied power.
Absent Counter — Indicates the times the power supply was stopped to the powered device because
the powered device was no longer detected.
Invalid Signature Counter — Indicate the times an invalid signature was received. Signatures are
the means by which the powered device identifies itself to the PSE. Signatures are generated during
powered device detection, classification, or maintenance.
Determines the port priority if the power supply is low. The port power
Configuring System Information
95

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents