Setting the Unregistered Multicast Status of an Interface
1 Open the Unregistered Multicast page.
2 Select the interface for which Unregistered Multicast needs to be set.
3 Select a status in the Status field.
4 Click Apply Changes.
Unregistered Multicast status is set.
Displaying the Unregistered Multicast Table
1 Open the Unregistered Multicast page.
2 Click Show All.
The Unregistered Multicast Table opens.
Figure 7-77. Unregistered Multicast Table
The Unregistered Multicast Table displays the following additional fields:
•
Unit No. — Selects a stacking member.
•
Copy from — Copies parameters from the selected item.
Copying Unregistered Multicast Settings Between Interfaces
1 Open the Unregistered Multicast page.
2 Click Show All. The Unregistered Multicast Table opens.
3 In the Copy Parameters from field, select the interface from which to copy.
4 For each interface to which you want to copy parameters, select the checkbox in the Copy to field.
Alternativey, click Select All to automatically select all interfaces.
5 Click Apply Changes.
The Unregistered Multicast parameters are copied between the interfaces.
402
Configuring Switch Information