Defining Sntp Interfaces - Dell PowerConnect 3524P User Manual

Defining SNTP Servers Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the SNTP
Server page.
Table 6-11. SNTP Server CLI Commands
CLI Command
sntp server ipv4-address|ipv6-
address|hostname [poll] [key keyid]
The following is an example of the CLI commands:
Console(config)# sntp server 100.1.1.1 poll key 10

Defining SNTP Interfaces

The SNTP Broadcast Interface Table page contains SNTP interface information. To open the SNTP
Broadcast Interface Table page, click System → SNTP → Interface Settings.
Figure 6-17. SNTP Broadcast Interface Table
Description
Configures the device to use SNTP to request and accept SNTP
traffic from a server.
Configuring System Information
111