Dell PowerConnect 3524P User Manual page 124

Figure 6-23. Remote Log Server Settings
The Remote Log Server Settings page contains the following fields:
• Available Servers — Contains a list of servers to which logs can be sent.
• UDP Port (1-65535) — The UDP port to which the logs are sent for the selected server. The possible
range is 1 - 65535. The default value is 514.
• Facility — Defines a user-defined application from which system logs are sent to the remote server.
Only one facility can be assigned to a single server. If a second facility level is assigned, the first facility
level is overridden. All applications defined for a device utilize the same facility on a server. The field
default is Local 7. The possible field values are:
– Local 0 to Local 7.
• Description (0-64 Characters) — The user-defined server description.
124
Configuring System Information