•
Single Collision Frames — Number of single collision frame errors received on the selected interface.
•
Late Collisions — Number of late collisions received on the selected interface.
•
Internal MAC Transmit Errors — Number of internal MAC transmit errors on the selected interface.
•
Oversize Packets — Number of oversize packets on the selected interface.
•
Received Pause Frames — Number of received paused errors on the selected interface.
•
Transmitted Pause Frames — Number of transmitted paused errors on the selected interface.
Displaying Etherlike Statistics for an Interface
1 Open the Etherlike Statistics page.
2 Select an interface in the Interface field.
Resetting Etherlike Statistics
1 Open the Etherlike Statistics page.
2 Click Reset All Counters.
The Etherlike Statistics counters are reset.
Viewing Etherlike Statistics Using the CLI Commands
The following table contains the CLI commands for viewing etherlike statistics.
Table 8-2. Etherlike Statistics CLI Commands
CLI Command
show interfaces counters [ethernet
interface | port-channel port-
channel-number ]
412
Viewing Statistics
Description
Displays traffic seen by the physical
interface.