Displaying the MSTP VLAN to Instance Mapping Table
1 Open the Spanning Tree MSTP Settings page.
2 Click Show All to open the MSTP VLAN to Instance Mapping Table.
Figure 7-43. MSTP VLAN to Instance Mapping Table
Defining MST Instances Using CLI Commands
The following table summarizes the equivalent CLI commands for defining MST instance groups as
displayed in the Spanning Tree MSTP Settings page.
Table 7-23. MSTP Instances CLI Commands
CLI Command
spanning-tree mst configuration
instance instance-id {add | remove} vlan vlan-
range
name string
revision value
spanning-tree mst instance-id port-priority
priority
spanning-tree mst instance-id priority priority
spanning-tree mst max-hops hop-count
Description
Enters MST Configuration mode.
Maps VLANs to the MST instance.
Sets the configuration name.
Sets the configuration revision number
Sets the priority of a port.
Sets the device priority for the specified spanning tree instance.
Sets the number of hops in an MST region before the BPDU is
discarded and the information held for a port is aged.
Configuring Switch Information
345