Dell PowerConnect 3524P User Manual page 342

Displaying the Rapid Spanning Tree (RSTP) Table
1 Open the Rapid Spanning Tree (RSTP) page.
2 Click Show All.
The Rapid Spanning Tree (RSTP) Table opens.
Figure 7-41. Rapid Spanning Tree (RSTP) Table
Defining Rapid STP Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for defining Rapid STP parameters as
displayed in the Rapid Spanning Tree (RSTP).
Table 7-22. RSTP Settings CLI Command
CLI Command
spanning-tree link-type {point-to-point | shared}
spanning tree mode {stp | rstp | mstp}
clear spanning-tree detected-protocols [ethernet
interface | port-channel port-channel-number]
show spanning-tree [ethernet interface | port-channel
port-channel-number]
The following is an example of the CLI commands:
console(config)# interface ethernet 1/e5
console(config-if)# spanning-tree link-type shared
console(config-if)# spanning tree mode rstp
342
Configuring Switch Information
Description
Overrides the default link-type setting.
Configure the spanning tree protocol currently running.
Restarts the protocol migration process.
Displays spanning tree configuration.