Dell PowerConnect 3524P User Manual page 314

• Status — Indicates if the port is currently monitored (Active) or not monitored (Ready).
• Remove — Removes the port mirroring session. The possible field values are:
– Checked — Removes the selected port mirroring sessions.
– Unchecked — Maintains the port mirroring session.
Adding a Port Mirroring Session
1 Open the Port Mirroring page.
2 Click Add.
The Add Source Port page opens.
Figure 7-28. Add Source Port
3 Define the Source Port and the Type fields.
4 Click Apply Changes.
The new source port is defined, and the device is updated.
Deleting a Copied Port from a Port Mirroring Session
1 Open the Port Mirroring page.
2 In the Source Ports table, select the port's Remove check box.
3 Click Apply Changes.
The selected port mirroring session is deleted, and the device is updated.
Configuring a Port Mirroring Session Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring a Port Mirroring session
as displayed in the Port Mirroring page.
Table 7-15. Port Mirroring CLI Commands
CLI Command
port monitor src-interface [rx | tx]
314
Configuring Switch Information
Description
Starts a port monitoring session.