Viewing Port Statistics Using the CLI Commands
The following table contains the CLI commands for viewing port statistics.
Table 8-11. Port Statistic CLI Commands
CLI Command
show interfaces counters [ethernet
interface | port-channel port-
channel-number ]
show rmon statistics {ethernet
interface | port-channel port-
channel-number }
show gvrp statistics {ethernet
interface | port-channel port-
channel-number }
show gvrp-error statistics {ethernet
interface | port-channel port-
channel-number }
Viewing LAG Statistics
Use the LAG Statistics page to open statistics in a chart form for LAGs. To open the LAG Statistics
page, click Statistics/RMON→ Charts→ LAG Statistics in the tree view.
Figure 8-15. LAG Statistics
Description
Displays traffic seen by the physical
interface.
Displays RMON Ethernet
statistics.
Displays GVRP statistics.
Displays GVRP error statistics.
437
Viewing Statistics