Vlan List - Dell PowerConnect 3524P User Manual

Enabling Port Based Authentication Using the CLI Commands
The following table summarizes the equivalent CLI commands for enabling the port based
authentication as displayed in the Port Based Authentication table.
Table 7-1. Port Authentication CLI Commands
CLI Command
aaa authentication dot1x default
method1 [method2.]
dot1x auth-not-req
dot1x guest-vlan
dot1x guest vlan enable
dot1x mac-authentication
dot1x max-req count
dot1x re-authenticate [ethernet
interface]
dot1x re-authentication
dot1x timeout quiet-period seconds
dot1x timeout re-authperiod seconds
dot1x timeout server-timeout seconds
dot1x timeout supp-timeout seconds
dot1x timeout tx-period seconds
dot1x traps mac-authentication failure Enables sending traps when the MAC address failed authenticaiton
dot1x radius-attribues vlan
show dot1x [ethernet interface]
show dot1x advanced
show dot1x users [username username]
dot1x guest-vlan enable
dot1x guest-vlan
Description
Specifies one or more authentication, authorization, and accounting
(AAA) methods for use on interfaces running IEEE 802.1X.
Enables authorized devices access to the VLAN.
Defines a Guest VLAN.
Enables authorized users on the inteface to access the Guest VLAN.
Enables authentication based on the station's MAC address (MAC
based authentication).
Sets the maximum number of times that the device sends an EAP to
the client, before restarting the authentication process.
Manually initiates a re-authentication of all 802.1X-enabled ports or the
specified 802.1X-enabled port.
Enables periodic re-authentication of the client.
Sets the number of seconds that the device remains in the quiet state
following a failed authentication exchange.
Sets the number of seconds between re-authentication attempts.
Sets the time for the retransmission of packets to the authentication server.
Sets the time for the retransmission of an EAP request frame to the client.
Sets the number of seconds that the device waits for a response to an EAP -
request/identity frame, from the client, before resending the request.
(MAC based authentication).
Enables user-based VLAN assignment.
Displays 802.1X status for the device or for the specified interface.
Displays 802.1X advanced features for the switch or specified interface.
Displays 802.1X users for the device.
Enables using a guest VLAN for unauthorized ports. If a Guest
VLAN is enabled, the unauthorized port automatically joins the
VLAN selected in VLAN List field. The field default is disabled.
Contains a list of VLANs. The guest VLAN is selected from the

VLAN List

Configuring Switch Information
267