Viewing the MSTP Interface Table
1 Open the MSTP Interface Settings page.
2 Click Show All.
The MSTP Interface Table page opens.
Figure 7-45. MSTP Interface Table
Defining MSTP Interfaces Using CLI Commands
The following table summarizes the equivalent CLI commands for defining MSTP interfaces as
displayed in the Spanning Tree MSTP Interface Settings page.
Table 7-24. MSTP Interface CLI Commands
CLI Command
spanning-tree mst instance-id cost cost
spanning-tree mst instance-id priority
priority
show spanning-tree mst-configuration
Description
Sets the path cost of the port for MST calculations
Sets the device priority for the specified ST instance.
Displays the MST configuration.
Configuring Switch Information
349