Defining Enable Passwords - Dell PowerConnect 3524P User Manual

Assigning Line Passwords Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the Line
Password page.
Table 6-39. Line Password CLI Commands
CLI Command
password password
[encrypted]
The following is an example of the CLI commands:
console(config-line)# password dell

Defining Enable Passwords

The Enable Password page sets a local password to control access to Normal and Privilege levels.
To open the Enable Password page, click System → Management Security → Enable Passwords in the
tree view.
Figure 6-69. Enable Password
The Enable Password page contains the following fields:
• Select Enable Access Level — Access level associated with the enable password. The lowest user access
level is 1 and 15 is the highest user access level. Users with access level 15 are Privileged Users, and only
they can access and use the OpenManage Switch Administrator.
• Password (0-159 characters) — The password to enable.
194
Configuring System Information
Description
Indicates a password on a line.