Dell PowerConnect 3524P User Manual page 305

• LAG Type — The port types that comprise the LAG.
• Admin Status — Enables or disables the selected LAG.
– Up — Traffic is enabled through the LAG.
– Down — Traffic is disabled through the LAG.
• Current Status — Indicates if the LAG is currently operating.
• Admin Speed — The configured speed at which the LAG is operating. The possible field values are:
– 10M — Indicates the LAG is currently operating at 10 Mbps.
– 100M — Indicates the LAG is currently operating at 100 Mbps.
– 1000M — Indicates the LAG is currently operating at 1000 Mbps.
• Current Speed — The speed at which the LAG is currently operating.
• Admin Auto Negotiation — Auto Negotiation is a protocol between two link partners that enables a
LAG to advertise its transmission rate, duplex mode and flow control abilities to its partner.
– Enable — Enables Auto Negotiation on the LAG.
– Disable — Disables Auto Negotiation on the LAG.
• Current Auto Negotiation — The current Auto Negotiation setting.
• Admin Advertisement — Defines the auto-negotiation setting the LAG advertises. The possible field
values are:
– Max Capability — Indicates that all LAG speeds and Duplex mode settings are accepted.
– 10 Full — Indicates that the LAG advertises for a 10 mbps speed LAG and full duplex mode
setting.
– 100 Full — Indicates that the LAG advertises for a 100 mbps speed LAG and full duplex mode
setting.
– 1000 Full — Indicates that the LAG advertises for a 1000 mbps speed LAG and full duplex mode
setting.
• Current Advertisement — The LAG advertises its speed to its neighbor LAG to start the negotiation
process. The possible field values are those specified in the Admin Advertisement field.
• Neighbor Advertisement — Indicates the neighboring LAG advertisement settings. The field values
are identical to the Admin Advertisement field values.
• Admin Flow Control — Indicates the flow control status on the LAG. Flow Control mode is effective
on the ports operating in Full Duplex in the LAG.
– Enable — Enables flow control on the LAG.
– Disable — Disables flow control on the LAG.
– Auto-negotiation — Enables the auto negotiation of flow control on the LAG.
Configuring Switch Information
305