Mapping Cos Values To Queues - Dell PowerConnect 3524P User Manual

Assigning Bandwidth Settings Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the Bandwidth
Settings page.
Table 9-5. Bandwidth Settings CLI Commands
CLI Command
traffic-shape committed-rate [committed-burst]
no traffic-shape
rate-limit rate
no rate-limit

Mapping CoS Values to Queues

The CoS to Queue page contains fields for classifying CoS settings to traffic queues. To open the CoS to
Queue page, click Quality of Service→ QoS Mapping→ CoS to Queue in the tree view.
Figure 9-5. CoS to Queue
448
Configuring Quality of Service
Description
Set shaper on egress port. Use no form in
order to disable the shaper.
Limit the rate of the incoming traffic. Use the
no form to disable rate limit.