Dell PowerConnect 3524P User Manual page 296

Binding a DHCP Snooping Database
1 Open the Binding Database page.
2 Click Add.
The Bind DHCP Snooping page opens.
Figure 7-20. Bind DHCP Snooping Page
3 Define the fields.
4 Click Apply Changes.
Configuring DHCP Snooping Binding Database with CLI Commands
The following table summarizes the equivalent CLI commands for configuring DHCP Snooping
Binding Database .
DHCP Snooping Binding Database
Table 7-11.
CLI Command
ip dhcp snooping binding mac-address vlan-id
ip-address {ethernet interface | port-channel
port-channel-number} expiry seconds
no ip dhcp snooping binding mac-address
vlan-id
clear ip dhcp snooping database
show ip dhcp snooping binding [mac-address
mac-address] [ip-address ip-address] [vlan
vlan] [ethernet interface | port-channel port-
channel-number]
296
Configuring Switch Information
CLI Commands
Description
Use the ip dhcp snooping binding privileged EXEC command
to configure the DHCP snooping binding database and to add
binding entries to the database. Use the no form of this
command to delete entries from the binding database.
Use the clear ip dhcp snooping database privileged EXEC
command to clear the DHCP binding database.
Use the show ip dhcp snooping binding user EXEC command
to display the DHCP snooping binding database and
configuration information for all interfaces on a switch.