Dell PowerConnect 3524P User Manual page 201

Figure 6-73. RADIUS Settings
The RADIUS Settings page contains the following pages:
• IP Address — The list of Authentication Server IP addresses.
• Priority (0-65535) — The server priority. The possible values are 0-65535, where 0 is the highest value.
This is used to configure the order in which servers are queried.
• Authentication Port (0-65535) — Identifies the authentication port. The authentication port is used
to verify the RADIUS server authentication.
• Number of Retries (1-10) — Indicates the number of transmitted requests sent to RADIUS server
before a failure occurs. The possible field values are 1-10.
• Timeout for Reply (1-30) — Indicates the amount of the time in seconds the device waits for an
answer from the RADIUS server before retrying the query, or switching to the next server. The possible
field values are 1- 30.
Configuring System Information
201