Queue Settings
•
Strict Priority — Indicates the system queues are SP queues, when selected.
•
WRR — Indicates the system queues are WRR queues, when selected.
Enabling Quality of Service:
1 Open the Global Settings page.
2 Select Enable in the Quality of Service field.
3 Click Apply Changes.
Class of Service is enabled on the device.
Enabling the Trust Mode:
1 Open the Global Settings page.
2 Define the Trust Mode field.
3 Click Apply Changes.
Trust mode is enabled on the device.
Enabling Trust Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the Global
Settings page.
Table 9-3. QoS Settings CLI Commands
CLI Command
qos trust [cos | dscp]
no qos trust
The following is an example of the CLI commands:
console(config)# qos trust dscp
This section contians the following topics:
•
"Defining QoS Interface Settings" on page 445
•
"Defining Bandwidth Settings" on page 446
•
"Mapping CoS Values to Queues" on page 448
•
"Mapping DSCP Values to Queues" on page 450
444
Configuring Quality of Service
Description
Configures the system to trust mode.
Returns to the non-trusted state.