Dell PowerConnect 3524P User Manual page 424

The RMON History Control page contains the following fields:
• History Entry No. — Entry number for the History Control page.
• Source Interface — Port or LAG from which the history samples were taken.
• Owner (0-20 characters) — RMON station or user that requested the RMON information.
• Max No. of Samples to Keep (1-50) — Number of samples to be saved. The default value is 50.
• Current No. of Samples in List — Indicates the current number of samples taken.
• Sampling Interval (1-3600) —Indicates the time interval in seconds, between what the samplings are
taken from the ports. The possible values are 1-3600 seconds. The default is 1800 seconds
(30 minutes).
• Remove — When checked, removes the History Control Table entry.
Adding a History Control Entry
1 Open the RMON History Control page.
2 Click Add.
The Add History Entry page opens.
3 Complete the fields in the dialog.
4 Click Apply Changes.
The entry is added to the History Control Table.
Modifying a History Control Table Entry
1 Open the RMON History Control page.
2 Select an entry in the History Entry No. field.
3 Modify the fields as desired
4 Click Apply Changes.
The table entry is modified, and the device is updated.
Deleting a History Control Table Entry
1 Open the RMON History Control page.
2 Select an entry in the History Entry No. field.
3 Click Apply Changes.
The table entry is deleted, and the device is updated.
424
Viewing Statistics