Dell PowerConnect 3524P User Manual page 204

Removing a RADIUS Server
1 Open the RADIUS Settings page.
2 Click Show All.
The RADIUS Servers List opens.
3 Select a RADIUS Servers List entry.
4 Select the Remove check box.
5 Click Apply Changes.
The RADIUS server is removed, and the device is updated.
Defining RADIUS Servers Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed on the
RADIUS Settings page.
Table 6-42. RADIUS Server CLI Commands
CLI Command
radius-server timeout timeout
radius-server source-ip source
radius-server source-ipv6 source
radius-server retransmit retries
radius-server deadtime deadtime
radius-server key key-string
radius-server host ip-address
] [
auth-port-number
retransmit retries
[ ] [
key key-string
[ ] [
]
priority
show radius-servers
204
Configuring System Information
auth-port
[
timeout
timeout]
deadtime deadtime
source source priority
] [
Description
Sets the interval for which a device waits for a server host to
reply.
Specifies the source IPv4 address that will be used for the IPv4
communication with RADIUS servers.
Specifies the source IPv6 address that will be used for the IPv6
communication with RADIUS servers.
Specifies the number of times the software searches the list of
RADIUS server hosts.
Configures unavailable servers to be skipped.
Sets the authentication and encryption key for all RADIUS
communications between the router and the RADIUS server.
Specifies a RADIUS server host.
]
Displays the RADIUS server settings.