Dell PowerConnect 3524P User Manual page 80

• Unit No. — Indicates the unit number for which the device asset information is displayed.
• Service Tag — The service reference number used when servicing the device.
• Asset Tag (0-16 Characters) — Indicates the user-defined device reference.
• Serial No. — The device serial number.
Defining System Information
1 Open the Asset page.
2 Define the relevant fields.
3 Click Apply Changes.
The system parameters are defined, and the device is updated.
Initiating a Telnet Session
1 Open the Asset page.
2 Click Telnet.
A Telnet session is initiated.
Configuring device Information Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing and setting fields displayed
in the Asset page.
Table 6-1. Asset CLI Commands
CLI Command
hostname name
snmp-server contact text
snmp-server location text
clock set hh:mm:ss day month year
show clock [detail]
show system id
show system
asset-tag text
show stack <1-8>
show system [unit unit]
show system id [unit unit]
80
Configuring System Information
Description
Indicates or modifies the device host name.
Sets up a system contact.
Enters information on where the device is located.
Manually sets the system clock and date.
Displays the time and date from the system clock.
Displays the service tag information.
Displays system information.
Sets the device asset tag.
Displays the system stack information.
Displays system information.
Displays system identity information.