Dell PowerConnect 3524P User Manual page 199

4 Select the Remove check box.
5 Click Apply Changes.
The TACACS+ server is removed, and the device is updated.
Defining TACACS+ Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in
theTACACS+ Settings page.
Table 6-41. TACACS+ CLI Commands
CLI Command
tacacs-server host {ip-address | host-
name} [single-connection] [port port-
number] [timeout timeout] [key key-
string] [source source] [priority priority]
tacacs-server key key-string
tacacs-server timeout timeout
tacacs-server source-ip source
show tacacs [ip-address]
Description
Indicates a TACACS+ host.
Indicates the authentication and encryption key
for all TACACS+ communications between the
device and the TACACS+ server. This key must
match the encryption used on the TACACS+
daemon. (Range: 0 - 128 characters.)
Indicates the timeout value in seconds. (Range: 1
- 30.)
Indicates the source IP address. (Range: Valid
IP Address.)
Displays configuration and statistics for a
TACACS+ server.
Configuring System Information
199