Defining Dhcp Ipv4 Interface Parameters - Dell PowerConnect 3524P User Manual

The following is an example of the CLI commands:
console(config)# interface vlan 1
console(config-if)# ip address 92.168.1.123 255.255.255.0
console(config-if)# no ip address 92.168.1.123
console(config-if)# end
console# show ip interface vlan 1
Gateway IP Address
---------------------------------------
192.168.1.1
IP address
-------------------------------------------------
192.168.1.123/24

Defining DHCP IPv4 Interface Parameters

The DHCP IPv4 Interface page contains parameters for defining DHCP clients on device interfaces.
To open the DHCP IPv4 Interface page, click System → IP Addressing → DHCP IPv4 Interface in the
tree view.
Figure 6-30. DHCP IPv4 Interface
134
Configuring System Information
Activity status
Active
Interface
VLAN 1
Type
Static