Dell PowerConnect 3524P User Manual page 210

• Tx Optional TLVs — Contains a list of optional TLVs advertised by the port. For the complete list,
see the Available TLVs field.
• Management IP Address — Indicates the management IP address that is advertised from the
interface.
– Use Default — Specifies the way TLVs are included:
– Checked — Only mandatory TLVs are used by default; they are Chassis subtype (MAC address),
Port subtype (port number), and TTL (time-to-leave equal to 120s).
– Unchecked — User-defined TLVs consisting of the 3 above mentioned mandatory TLVs plus
optional TLVs that are moved by user from the Avalable set of TLVs.
The LLDP Port Table page displays the LLDP Port Configuration. To open the LLDP Port Table,
→
click Security LLDP
Figure 6-78. LLDP Port Table
Table 6-44. LLDP Port settings CLI Commands
CLI Command
clear lldp rx interface
lldp optional-tlv tlv1 [tlv2 ... tlv5]
lldp enable [rx | tx | both]
The following is an example of the CLI commands:
Console(config)# interface ethernet g1
Console(config-if)# lldp enable
210
Configuring System Information
→ →
Port Settings Show All in the tree view.
Description
Restarts the LLDP RX state machine
and clearing the neighbors table
Specifies which optional TLVs from the
basic set should be transmitted
To enable Link Layer Discovery
Protocol (LLDP) on an interface.