Resetting The Device - Dell PowerConnect 3524P User Manual

Switching Between Stack Masters
1 Open the Stack Management page.
2 Check the Switch Stack Control from Unit 1 to Unit 2 check box.
3 Click Apply Changes.
A confirmation message displays.
4 Click OK.
The device is reset. After the device is reset, a prompt for a user name and password displays.
Managing Stacks Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the Stack
Management page.
Table 6-7. Stack Management CLI Commands
CLI Command
stack reload
stack master

Resetting the Device

The Reset page enables the device to be reset from a remote location. Save all changes to the Startup
Configuration file before resetting the device. This prevents the current device configuration from being
lost. For more information about saving Configuration files, see "Copy Files" on page 239
Reset page, click System
Figure 6-9. Reset
The Reset page contains the following field:
Reset Unit No. — Resets the selected stacking member.
100
Configuring System Information
Description
Reloads stack members.
Forces the stack master selection
→ →
General Reset in the tree view.
To open the
.