Figure 7-35. Spanning Tree Global Settings
The Spanning Tree Global Settings page contains the following fields:
•
Spanning Tree State — Enables or disables Spanning Tree on the device. The possible field values are:
–
Enable — Enables Spanning Tree.
–
Disable — Disables Spanning Tree.
•
STP Operation Mode — Indicates the STP mode by which STP is enabled on the device. The possible
field values are:
–
Classic STP — Enables Classic STP on the device. This is the default value.
–
Rapid STP — Enables Rapid STP on the device.
–
Multiple STP — Enables Multiple STP on the device.
326
Configuring Switch Information